Biscotti Inc. ("Biscotti") warrants the Biscotti electronic device ("Product") to the original purchaser ("you") against defects in materials and workmanship under normal use for a period of three hundred and sixty-five (365) days from the date of original purchase ("Warranty Period"). You may not transfer this warranty. If a defect occurs and a valid claim is received by Biscotti within the Warranty Period, Biscotti will, at its option, either (1) repair the hardware defect using new or refurbished parts, (2) exchange the Product with a new or refurbished product that is at least functionally equivalent to the original Product, or (3) refund the purchase price of the Product.
Replaced or repaired Products assume the remaining Warranty Period of the original Product, or thirty (30) days from the date of replacement or repair, whichever is longer. When a Product is exchanged, any replacement Product becomes your property and the replaced Product becomes Biscotti’s property. When a refund is given, you must return the Product at your expense, and it becomes Biscotti’s property.
To obtain warranty service, first visit the Biscotti website (www.Biscotti.com/warrranty) or write to Biscotti Inc. 825 Watters Creek Blvd., Bldg. M, Suite 250, Allen, TX 75013 USA. You will be required to deliver the Product, freight prepaid, in its original packaging or packaging providing an equal degree of protection, to the address specified by Biscotti. In accordance with applicable law, Biscotti may require that you furnish proof of purchase details and/or comply with registration requirements before receiving warranty service.
This warranty does not apply: (a) to any software or any non-Biscotti hardware products, even if packaged or sold with the Product (refer to the applicable software license for details of your rights with respect to use of software), (b) to consumables (such as batteries); (c) to defects caused by normal wear and tear; (d) to cosmetic damage (such as scratches and dents); (e) to damage caused by use with non-Biscotti products; (f ) to damage caused by liquids, accident, abuse, misuse, fire or other external causes; (g) to damage caused by failure to follow the Product instructions or use not intended by Biscotti; or (h) to damage caused by unauthorized service. Biscotti does not warrant that the operation of the Product will be uninterrupted or error-free.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN. TO THE EXTENT PERMITTED BY LAW, ALL STATUTORY AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. SOME JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE LIMITATION MAY NOT APPLY TO YOU. BISCOTTI IS NOT RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT, SPECIAL, INCIDENTAL OR OTHER NON-DIRECT DAMAGES RESULTING FROM ANY BREACH OF THIS WARRANTY UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOSS OF USE, LOSS OF REVENUE, LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF OPPORTUNITY, LOSS OF GOODWILL, OR LOSS OF DATA, HOWSOEVER CAUSED. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
No Biscotti reseller, agent, or employee is authorized to make any modification to this warranty. If any term of this warranty is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This device complies with FCC Part 15 and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Ce dispositif est conforme à la norme FCC Partie 15 et Industrie Canada exempts de licence standard RSS (s). L’opération est soumise aux deux conditions suivantes: (1) cetappareil ne peut pas provoquer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l’appareil.
Warning! Changes or modifications not expressly approved by the manufacturer could void the users’ authority to operate this equipment.
Attention! Les changements ou modifications non expressément approuvés par le fabricantpourrait annuler l’autorisation de l’ utilisateur à utiliser cet équipement.
The Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Exposure to Radio Frequency Energy: The radiated output power of the wireless device is below the FCC and Industry Canada radio frequency exposure limits. However, this device should be operated with a minimum distance of at least 20 cm between the antenna and a person’s body and the antennas used with this transmitter must not be collocated or operated in conjunction with any other antenna or transmitted subject to the conditions of the FCC Grant.
Note: This equipment bas been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna, (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and (4) Consult the dealer or an experienced radio/TV technician for help.
This product contains binary forms of the Enlightenment Foundation Libraries (www.enlightenment.org). The Enlightenment Foundation Libraries are property of Carsten Haitzer and various contributors. 2000-2011 Carsten Haitzler and various contributors. All rights reserved.